Rsview32

Hello guys,
Any one can help me how to start with Rsview32? I have software of it,but i don't exp. in any scada.If anybody advise me how to start with it,what kind of animations can be created to familiar with rsview32,i will be very thankful 2 u all.

Thanks 2 all PLC gurus.Have a nice day.

Open the RSView 32 samples project installed into your PC during setup. It shows what kind of animation it can do for you.

There is more than what I can write here to do with it to get it work. Some of the basic steps is

Create a communications link with the PLC

Create the necessary tags in the tag database for RSView to talk to PLC (You have to know exactly what you want RSView to do for you)

Create the graphics, link up the database, do animations, setup alarm, etc, etc.

Hope this is some help to start up with