TS Adapter

Hello All

It´s posible connection direct TS-Adapter to the PC and program a PLC Step7-300 using Step7 ?For that,do i need some update?

many thanks for help

necyil

Hello necyil;

Look at the following link first:
http://support.automation.siemens.com/WW/view/en/23061935
Basically, you can setup a "direct connection" using a TS-adapter; however, to configure it you will need the Teleservice software package (for modem comms to the S7) from Siemens.
Hope this helps,
Daniel Chartier