kedens@cornerstone
Member
Hey guys I need a recommendation for and encoder (type,brand) that will be easily interfaced with an Allen Bradley MicroLogix 1500.
Thanks, Kevin
Thanks, Kevin
Encoder
- Thread starter kedens@cornerstone
- Start date
magicsmoke
Member
We use Accu-coder, Powermation and Dynapar usally going to a highspeed counter card depends on the PPR and the RPM's that it is moving. I'm sure there is more encoders out there and they all do the same job.
Similar Topics
Sorry in advance for the long post, but this requires a little back story.
I work in a facility with a couple hundred VFDs
Most are in a web...
I have an application using an incremental encoder and then I convert it to degree (0-360) using calculation program. For a while, the calculation...
Hi everyone,
This is my first time posting, so please forgive any omissions or mistakes.
I am attempting to control the velocity of a stepper...
Dears,
i am trying to change the series of encoder from A to B, but the program do not has this option (Rslogix5000, 20.06
the old encoder was...
Hi all,
I am working with an incremental encoder (ABZ signals, 360 ppr (so 1440 counts per rev)) to replace the existing "manual" encoder wheel I...