Op 15 Coros

Hello to all,

I have few questions considering the old Siemens OP`s (15 and 17). Is it possible to do the back up from the panel if I do not have original project (with Pro Save for example)? What is the procedure and which cable do I need in order to do that?
It is a little bit hard to find some manuals for this old stuff...

Thanks in advance

Because this is one of the most frequently asked questions, I have written a document and put it in the downloads section:

http://www.plcs.net/downloads/index.php?action=downloadfile&filename=How_to_upload_migrate_from_OPx5_OPx7.pdf&directory=Siemens&

Thanks Jesper,

I appologize for not investigating before posting the topic...

Hello again,

One more thing... how can I know if the panel is programed by COMTEXT. What is the file extension? I have the project that machine producer left which is for S5 and I thought that the only way to program Siemens OP was with ProTool so I could not find panel project. But now maybe there is panel aplication done with COMTEXT...

I think the COMTEXT extension ends with ".A05" for OP5 and ".A15" for OP15.
Protool extension is ".PDB".