Hi Myself Nijas, I am facing a problem that I have to programme one new HMI TP270 (Siemens)(no programme exists in TP). For that serial communication cable is required. antbody can write configuration of the cable. The port in the TP is 9 pin . Immediate help should be highly appreciated.
Serial communication with TP270
- Thread starter nijaseng
- Start date
Similar Topics
Currently,we are facing the communication go through with 422 tx+ and tx-.
Mitsubishi fx5u series is used and using command rs2.
But the package...
I have wasted a week trying to figure out how to connect an SLC5/03 with my laptop.
I do not have and can not Buy the 1747 UIC and PC3 cables.
I...
MELSEC A RS422 (25pin) <> iQR C24 Serial RS232 (9pin) - Simple PLC Communication
Communication from a MELSEC-A Series CPU (RS-422 – DB 25 Pin)...
Hey guys,
I have a problem reading weighing data from AND AD4406 with OP-05 RS-232C Relay and Control input using Rockwell PLC Micro820. I already...
I have a zebra barcode scanner connected to a ******* device master UP. They are connected by RS232. By checking the serial logs on the device...