IM308C (FB 192) for release 2

neilrudden

Member
N
Join Date
Feb 2008
Location
Cape Town
Posts
1
Hello All,

I am looking for a version of FB IM308C (FB 192) for release 2. I have only managed to find a version that will work for release 6.

I would appeciate if anybody can assist with some links to this..

Neil
 

Similar Topics

N
im308c and s5 155u(cpu948)
i have an old PLC : S5 155U (CPU 948) i need to connect it to ABB PLC using Profibus-DP, ABB will act as Master and S5 as slave. I need to...
Replies
3
Views
3,009
moggie
M
B
IM308C to InTouch Communication
Hi all, could anybody confirm if is possible to communicate over IM308C (S5-115)by PROFIBUS DP protocol to InTouch SCADA (PC side CP5613A2 card...
Replies
2
Views
1,750
BoSChoW
B
C
s7400 and im308c slave
I have the following problem on this sistem . The master is s7 400 , slaves are connected to profibus , there are three slaves , a s5-95 from wich...
Replies
4
Views
2,694
catalin78
C
C
Adding DP to an S5 PLC rack using IM308C
I need to connect an S5-115U to a MP370 using a current loop connection (tty) using a S5 AS511 connection ? I was wondering if I have to...
Replies
1
Views
4,292
[FIN]Pete
F
T
Configuring connection between IM308C (SIMATIC S5) and OP270 panel via Profibus DP
Hello collages, There is a system which configured S5-155U cpu948 and 6 pieces OP25's and communicated with profibus dp (IM308C).I want to change...
Replies
4
Views
5,306
RRobbins
RRobbins
Back
Top Bottom