Replaced Westermo MD-44 with MD-45

mvlrao

Member
M
Join Date
Aug 2003
Location
DUBAI
Posts
4
When MD-45 was replaced with MD-45 the device is not working. As per Westermo, MD-45 replaces MD-44 and MD-44 is no longer available. All settings are same. Used in data control mode. Can any one help ?

Thanks
 

Similar Topics

D
MLX1400 to be replaced with ??
I have an OEM customer that has been building a small machine using a MicroLogix 1100 which is now discontinued. I have recommended that they use...
2 3
Replies
32
Views
5,383
BachPhi
BachPhi
P
Very old logic systems replaced
Just reminiscing about some of my early days of using PLC's, the first one I replaced was relay logic, this was a cutting press with 12 different...
2 3
Replies
41
Views
12,151
dogleg43
D
C
Replaced a Old Powerflex 70. On powerdown always get a Fault 107 Replaced MCB-PB
Good Afternoon , Replaced a old Powerflex 70 drive, Everytime on a power down we get a Fault 107. We need to go to parameter 197 , to 1 ...
Replies
0
Views
1,289
Cydog
C
I
Are PLCs being replaced more due to failures or lack of spare parts?
A question for the people who work on industrial sites. A customer complained about having to revamp several premium PLC that worked fine...
2
Replies
21
Views
8,054
parky
P
K
Less suction pressure on Blower after Star-delta starter replaced by VFD
A dust collector blower fan motor 18kW, previously run by a star-delta starter, has been replaced with a VFD( Brand: LS, Model: SV-iP5A). Our...
2 3
Replies
38
Views
11,776
2rlp
2rlp
Back
Top Bottom