prdutta68
Member
I have to connect two S7400H Hot Redundant systems. Can I use two DP/DP couplers i.e one for each channel?? Instead of using one DP/DP coupler with Y links on each side.
Redundant Profibus connections
- Thread starter prdutta68
- Start date
Similar Topics
Hi,
Greetings for all of you.
Please find the attached system configuration of GE RX3i redundant system. We have to communicate 2 Siemens...
I am working on a project where there is an S7-417H PLC with ET200 I/O on redundant profibus. One of my I/O drops has 1 pair of existing fibers...
Hi All,
Has any of you tried to change the IP Gateway of the PLC (of course, essentially of the ENBT card), while in a redundant configuration...
I have a redundant ControlLogix being set up. This program reads a value from a remote site which happens to be SLC PLC. Rockwell mentions SLC...
Hi,
we are using Rx3i CRU320 redundant PLC system and we noticed a discrepancy between Primary and Secondary controller.
Couple of variables (DI)...