rslinx with pv1000

DMyers

Member
D
Join Date
Jan 2009
Location
Virginia
Posts
6
hello all, i have a pv1000 (standard terminal) with ethernet com port and a 5/03 processor ..... is there any way to bridge the 2 via the pc's serial and ethernet ports via rslinx clssic ? or any other way for that matter

thanks in advance
 
You asked about this the other day. The afore-mentioned NET-ENI module is the way to go.
I don't know about using the PC to bridge the two.
 

Similar Topics

D
RSLINX and PV1000 2711-T10C20 ser D
I'm trying to figure why RSLINX couldn't automatically detect my ethernet PV1000 with the "ether/IP" driver. I configured the "ethernet/IP driver...
Replies
6
Views
2,796
david90
D
P
RSLinx Classic Network Dropout
Hi, I am working on a project, where I face a issue with respected to Network Dropout. The PLC is connected to a 16 port unmanaged switch, where...
Replies
7
Views
189
TheWaterboy
TheWaterboy
L
Resetting old RSLINX Master Disk floppy
Does Rockwell still offer reset codes for old school Master Disk floppy's? In a bind and need to reset the activation disk soon and to be pointed...
Replies
9
Views
230
LMDAVE
L
E
RSLinx Slow to Open
Anyone have issues with RSLinx being very slow to open. It sometimes will say "Checking Activation" at the bottom for what seems like an...
Replies
2
Views
151
eight_bools
E
R
LibreOffice DDE RSLinx
I need to support some old data collection that is running on Excel, but I need to get it running on LibreOffice. The following statement works...
Replies
0
Views
85
rigsha97
R
Back
Top Bottom