View Full Version : Controlnet through PLC5

July 14th, 2009, 10:35 AM
Quick question. I have a controlnet network hooked to a controlnetmodel PLC5. Is it possible to go online to the controlnet with RSNetworx through the PLC5?
Or will I have to purchase a PCC card?
Currently as I see it we have no way of going online to configure the controlnet with the equipment I havve. I want to be prepared for a catastrophic abnormality. :smas:

July 14th, 2009, 01:31 PM
Please feel free to ignore this question. I was thinking this would be similar to devicenet network. It appears that all the configuration, addressing and even scaling info for my nodes are all configured in the PLC5 via RSlogix5.
I dun lernt me sumpin 2day.