profibus cable lenght
- Thread starter hosein
- Start date
Does the length of profibus cable matter?? is this your question?? If so, 100 to 1200 m dependent on the baudrate.
See page 8 of this document:-
http://www.microinnovation.com/PortalData/1/Resources/documents/M000872-02.pdf
Rgrds
LH
See page 8 of this document:-
http://www.microinnovation.com/PortalData/1/Resources/documents/M000872-02.pdf
Rgrds
LH
Similar Topics
Hi Folks,
I am new to the S7-300 and the whole Profibus communication. And I just wonder that can you connect a S7-300 module to a Beckhoff Bus...
Hello everyone, friends. We have a machine where our main CPU is a Siemens S7-300, but with different makes and models of drivers, and modules...
Ok here is the problem we have a Siemens DP PLC (Master) and RIO ( slave) at the end of a Fiber Cable that runs through a Slip ring via OLMs...
Hello guys,
I need your help regarding the proper termination of Profibus cables. I now that in theory in order to minimize the noise and to...
Dear All,
I want to know, due to aging, temperature and humidity present in the room, the power cables got hard. This hardening does effect the...