Talking to Emerson Ovation DCS using OPC

cadence

Member
C
Join Date
Aug 2008
Location
Aberdeen
Posts
5
Hi Guys,

Anybody implemented OPC communication to talk to Emerson Ovation DCS.

I am looking for the solution to collect data from Emerson Ovation and display remotely on third party HMI.

thanks
cad
 

Similar Topics

S
1756-EN2TR and a CPU with Ethernet not talking to it's twin PLC via the EN2TR
Hi All, Got a funny issue. I have a 1756-L85EP and a 1756-EN2TR in the same chase. The client asked for the Ferrari and the 3 lane highway!!! We...
Replies
1
Views
169
robertmee
R
S
Proficy Machine Edition talking with SVX9000
Hello friends, I am tasked to get a SVX9000 Eaton VFD to talk to a plant which uses Proficy Machine Edition (PAC systems RX3I) PLC. The VFD has...
Replies
5
Views
1,872
brinocerous
B
S
ControlLogix talking to Schneider PACDrive LMC
What is required for a ControlLogix PLC to read/write tags from a Schneider PACDrive LMC PLC? Does the PACDrive have Ethernet/IP protocol built in...
Replies
1
Views
1,763
Bazook7777
B
TheWaterboy
ENBT/A stopped talking
Hi Guys Moments ago I just had my first ENBT failure. While the front of it showed everything was fine, it would not respond to ping or to comm...
Replies
3
Views
1,351
TheWaterboy
TheWaterboy
O
Talking to a Motortronix XLD Soft Starter using a MVI56-MCMR
I am very new when it comes to programming thing using a Prosoft card using Modbus. I am fine to figure that out by studying the manual. However I...
Replies
1
Views
1,189
jraef
J
Back
Top Bottom