Red Lion

mvaughan

Lifetime Supporting Member
mvaughan
Join Date
Sep 2007
Location
South West Michigan
Posts
62
We would like to use a Red Lion G3 to choose a date code from a .cvs file and send that to our coder. I know we need to get a new module for the coder to recieve tne code. What is the best software package for the Red Lion to communicate with the server? Sorry for the lack of info but I don't have a lot of experience with OPC type software. o_O

Thanks
 

Similar Topics

BobB
What has the Red Lion hiccup cost you?
While they came up quickly with a fix for the alarm date issue quickly I will have to drive around for a week or so, burning up a lot of fuel...
Replies
4
Views
264
padees
P
A
PSA: Red Lion datalog, alarm and event date/time errors
From the Red Lion website, after some customer enquiries in the last week or so... Rev. March 25, 2024 [18:30] Just thought it might help a...
Replies
9
Views
279
DwSoFt
D
K
Red Lion BMS Crimson 3.1 update
How do you install update on Red Lion Crimson ver 3.1. Do I just need to run the exe file on the host server?
Replies
1
Views
107
BryanG
B
T
Red Lion CR3000, Remote reboot possible?
Hello All, I need the ability to remotely reboot a Red Lion CR3000 HMI. Due to some graphics issues when the database is updated the HMI must be...
Replies
4
Views
218
TopperAce
T
N
Red Lion Graphite G12-RS485 port loses connection to Red Lion Cub
I'm trying to use a Red Lion Cub counter (Cub5B00) as a counter and give the cub's counts to a Graphite G12 PLC/HMI to display. After about an...
Replies
1
Views
111
Ken Roach
Ken Roach
Back
Top Bottom