SLC 5/05 Panelview and Inview Display Setup

Hi there,

Im a bit new at this stuff but ill try my best.

Ok atm i have an SLC 5/05 OS501 1747 L551B/C IP address 10.0.2.6. On channel 0 i have a Panelview 600C touch 2706-T6C16 DF1. It is node 1 and the SLC is node 2.

I am wanting to add an Inview Display 2706-P22R. I am wondering how to do this without buying another adaptor etc. I already have a 1747-DPS2 port splitter and was wondering if i can use this? If so how do i set it up? If not what are my options?

Thank you

I no find the 2706-T6C16 datum,if your 600c have an EtherNet Rj45 ,I advice you buy the HUB(I used the model SPIDER 5TX [FONT=宋体]Hirrschmann)[/FONT],the 600C and SLC 5/05 via the Ethernet commuinctaion,then 2706-P22R by the RS232 contact the SLC 5/05, if your 600c no rj45,you only use the 1747-DPS2