Hi All , having a problem getting a LS Master K120s Plc and PC to talk to each other.
I'm just starting to learn plc's so i hope i'm making sense.
LS Master K120s K7M-DR20UE plc with XP10BKA/DC touch screen connected via rs232 cable.
LS KGL_WIN software on laptop
Connection via RS232 (plc) to USB (pc).
With the KGL program open when i try to "connect" the plc to the pc i get an error message saying "PLC connection fail"
I have set the "connection options" in kgl to RS 232 and com port as per the instructions.
Being new to this its more than possible im missing something simple , but any pointers / advice will be much appreciated
Thanks
Marty
I'm just starting to learn plc's so i hope i'm making sense.
LS Master K120s K7M-DR20UE plc with XP10BKA/DC touch screen connected via rs232 cable.
LS KGL_WIN software on laptop
Connection via RS232 (plc) to USB (pc).
With the KGL program open when i try to "connect" the plc to the pc i get an error message saying "PLC connection fail"
I have set the "connection options" in kgl to RS 232 and com port as per the instructions.
Being new to this its more than possible im missing something simple , but any pointers / advice will be much appreciated
Thanks
Marty