SCADA PcVue 10 - Start Network Command Error (1043)

ongzy

Member
O
Join Date
Dec 2010
Location
Selangor
Posts
100
Error on start network command (1043)

I'm trying to link PcVue 10 to Saia Burgess PCD3.
Using Saia IP & Ethernet, both gave the same error.
Anyone encounter this before?
 
Yes. But ive forgotten how, so sorry. There is another alternative. We use modbus ethernet protocol instead of saia protocol. Hope this helps.
 
thanks for the answer.. already spent 3 days to try to solve it..
So, I need to update something in PcVue you mean?
 

Similar Topics

M
SCADA network extension to remote sites
So I'm pretty new around here but I come looking for advice or suggestions to research. Im the plant electrician/SCADA guy for a warer department...
Replies
4
Views
89
mburtis
M
I
omron cj2m with scada comunication
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
1
Views
53
IO_Rack
IO_Rack
P
Tag not working in scada application
Has anyone ever seen where you have a tag reading from the plc in scada. In this instance it's just a PEC, I set it up on one scada terminal and...
Replies
0
Views
90
petehannon007
P
P
Wonderware intouch scada
Hi guys, I have experience with PLC to Excel etc...just starting on using intouch scada screens. I have an Excel sheet that uses mainly...
Replies
1
Views
139
NetNathan
N
A
AVEVA Plant Scada not "in use" in Liscense Activation Manager
Hello guys, I would need some help. I have installed the aveva plant scada and want to run a project. From the configurator, all are fine, as I...
Replies
0
Views
104
Aimin Ariff
A
Back
Top Bottom