SLC150 Time Drive Sequencer

Since my program to run the coal yard seems to be errent
decided to go with a Sequncer and used the working start and reset fucntions.

However it seems to hang at step 1 and not continue i tried adding the step and cycele bits but no such luck any help much appriciated

Step 0 is 212 dump chute and 215 sound on for 4 seconds
step 1 213 dump car 4 seconds
step 2 211 raise bin 65 seconds
step 3 214 Lower coal bin 65 seconds
step 4 216 water tower down 5 secons
step 5 212 dump chute 4 seconds
Step 6 215 sound steam 3 seconsds
been messing with the times and event driven says i need high speed inputs

worked on this abit the sequncer now works how ever it lieks to runa nd run if any thing is put in front of the 902 seq it jsut hangs up
need a way to start the seq with the 201 start and the 2 minute timer
any Ideas?

Bingo Done Forgot about my Hold on the MCR 1 & 2 added latch and reset
works as sequecned final version attached