SLC 500/5 with kepware OPC on ethernet

Hello Everybody,

does anyone knows how to setup AB SLC500-5 PLC communication with KEPWARE OPC using Allenbradley ethernet driver of Kepware.
does anybody help me with an example? just configuration of the one tag on KEPWARE will do.

Thanks in Advance
Amit

If you call support they can walk you through the basics. I first recommend watching the 3 videos on creating a server project.


Creating a Channel
http://www.kepware.com/Support_Cent...ver Project - Part 1 - Creating a Channel.avi


Creating a Device
http://www.kepware.com/Support_Cent...rver Project - Part 2 - Creating a Device.avi


Creating a Tag
http://www.kepware.com/Support_Center/Video/Creating a Server Project - Part 3 - Creating Tags.avi

The example driver is the Modbus driver but the concept is the same.

The driver help file will provide the proper address syntax but for an example if you wanted to have a tag for word 7 in Integer file 0 the address syntax would be 'N7:7'.

Hello,

did you manage to set up an AB SLC5 PLC on Kepware OPC using Ethernet driver? Can you please share an example of how you did it?

Thanks.

Krisna