Cutler Hammer D100A

I am working with a Cutler Hammer D100A, does anybody know the name/type of cable i will need to get online with the PLC?

You will probably have to build one. See this thread. Read the whole thread 1st, then look closely at post #15. There is probably no more than $15 USD worth of parts needed.If you need help or clarification, please ask. I will be glad to assist any way I can.
Link:
http://www.plctalk.net/qanda/showthread.php?t=50546&highlight=d100

Edit:
Search ebay for this " Cutler hammer d100 plc computer direct connection cable" (without the quotes). I found a couple of ready made solutions.

Edit #2:
Post #45 in the same thread above shows how to modify this cable available on ebay. The ebay link also contains a lot of technical data about the cable in its unmodified form.
Link:
http://www.ebay.com/itm/MAX232-RS232-TTL-serial-cable-DB9-shell-Monitor-ECS-embedded-uC-OpenWRT-/290702083401?_trksid=p2045573.m2042&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D27%26meid%3D488271313453158568%26pid%3D100033%26prg%3D1011%26rk%3D2%26

ok

thanks for the information...i`ll have a crack at building one x