bzackrie
Member
I was wondering if it was possible to take allen bradley micrologix plc's and interface it to ge cimplicity hmi's. If it is possible what do I need to buy. I haven't had any luck finding anything.
Micrologix 1000 Interfacing with CIMPLICITY HMI?
- Thread starter bzackrie
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
As far as I understand it (I'm not a user), CIMPLICITY (like most other PC-based HMI programs) can be an OPC Client, so you need an OPC Server that can talk to A-B MicroLogix 1000's.
RSLinx Classic is the obvious candidate, if you have the licensed version.
There are quite a few other OPC Servers that can connect to MicroLogix 1000. The best are Kepware, Matrikon, and Software Toolbox.
RSLinx Classic is the obvious candidate, if you have the licensed version.
There are quite a few other OPC Servers that can connect to MicroLogix 1000. The best are Kepware, Matrikon, and Software Toolbox.
Similar Topics
"Hello! Good day! Excuse me, I have a question regarding the 1761-NET-ENI. RSLinx has already detected it but it's not connecting to the PLC...
Hi all,
We have a very old pit pump system running on Micrologix 1000. Now, whenever there is an alarm for high conductivity, we want that alarm...
Looking at a Micrologix 1000 1761-L32AWA, I tried to connect using the 1761-CBL-PM02 through a Serial to USB converter (This setup was used...
Hello All
I am trying to convert a ML1000 program for use in a ML1400. I didn't create the original program & documentation is non existent...
Hey Folks,
I have a customer with an older machine that is controlled with a MicroLogix 1000. The machine just quit working.
The power light is...
