CLV650 Profinet comms to S7-300

IanRobo75

Member
I
Join Date
Jan 2012
Location
Christchurch
Posts
15
I'm trying to communicate between an S7-319 and a Sick CLV650 Profinet scanner. The scanner is setup and scanning ok and gets an IP from the PLC so it seems that the PLC/Scanner comms is ok. However, the 64bytes in and out that we've configured in the S7 hardware (using the latest GSDML file) are showing with a red line though, since they can't be seen.

Is there anyone out there using this scanner and an S7 that can help with the configuration?
 

Similar Topics

A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
142
bkottaras
B
R
Siemens PLC and python communication over profinet
Hello Guys, I want to establish profinet communication between siemens plc and my system using python programming. Which python lib can i use to...
Replies
12
Views
374
Mandel314159
Mandel314159
A
Profinet Network Setup across Different Subnets in a Plant
I want to establish a Profinet network in my production plant to connect multiple devices, including a PLC, HMI, and multiple Profinet-based...
2
Replies
19
Views
682
aamirawan91
A
B
Siemens CP343 Profinet help
Hi, I have a customer with a S7300 from around 2013 which they link to approx 25 inverters, 3 DP to DP converters and 5 IM153 remote I/O units...
Replies
8
Views
320
JERA
JERA
R
Siemens S7-1200 profinet communication with codesys plc
Hi Guys, I am trying to establish communication over profinet between Siemens S7-1200 PLC as IO device and codesys plc as IO controller. But I am...
2 3
Replies
43
Views
2,866
raghu_k
R
Back
Top Bottom