redlion ethernet/ip master?

jonfarrugia

Member
J
Join Date
Mar 2008
Location
London
Posts
130
Are the redlion HMI's capable of being an ethernet/IP master?

I have a robot with a slave adapter and I'd like to add an HMI to the cell without adding a PLC if possible.
 
Not for class 1 io communications. But for explicit messaging, yes. You mentioned adapter, so that implies class 1 io communication so I would say no.
 

Similar Topics

C
BACNet/Ethernet to AB PLC with RedLion
I am trying to get data from a Chiller to an AB PLC or to my SCADA system. The protocol is BACNet/Ethernet, which is a layer2 protocol distinct...
Replies
0
Views
1,053
Cmurph
C
R
RedLion G308 and Logix 5562 ethernet problems.
Hi, new to the forum, and desperate. I am trying to connect a RedLion G308 via ethernet to a Logix 5562 PLC. I am connected via a switch directly...
Replies
2
Views
1,789
Richard Webb
R
S
Use RedLion G315 HMI Ethernet Auxiliary Port to Communicate to PLC
Hi guys, This may be a dumb question, but here it is. Is it possible to use the ethernet auxiliary port of a G315 Redlion HMI to communicate...
Replies
3
Views
2,967
Sombrero
S
W
Redlion with Ethernet/IP Device but no AB PLC
Just wondering if it is possible to have a Redlion device communicate with a sensor that has the Ethernet/IP communication capability, but not...
Replies
4
Views
2,226
wutnots
W
T
Redlion DataStation Plus to Multiple PLCS (Omron) 1 Ethernet Line
I am having a problem with communication Ethernet /Ip. The relay time in transmitting information is roughly 6 seconds From PLC to redlion to...
Replies
2
Views
2,983
JHarbin
J
Back
Top Bottom