I/O Configuration

pino2003fr

Member
P
Join Date
Nov 2006
Location
NJ
Posts
73
hello, everyone i have OPTICAL COMMUNICATION model OLC-DSL-85-D-ST
can someone tell how config the I/O card on SLC 5/03 , i don't have drive for it
thanks in advance

Capture.PNG
 

Attachments

  • Rockwell.pdf
    251.6 KB · Views: 4

Similar Topics

A
45DMS-B8LAT1-D4 configuration
Hello I have a sensor that I read data with IO-LINK but I don't know how to get my data. I see that I have two modes : Process data Map0 and Map...
Replies
0
Views
47
ahmeduqat
A
K
Kinetix configuration fault Command Notch Filter Width Undefined attribute
Kindly, we have the following configuration fault on a Kinetix 5700 axis. It only appears when we go online on the Plc. We are just starting the...
Replies
2
Views
87
Kataeb
K
Q
Updating IP Gateway of ENBT card in a Redundant Configuration
Hi All, Has any of you tried to change the IP Gateway of the PLC (of course, essentially of the ENBT card), while in a redundant configuration...
Replies
3
Views
127
QasimFSH
Q
B
Adding IB16S to the IO configuration - Logix Designer v31
Hello, Im building project with 1756-L82ES controller and 1756-IB16S card but i cant find it when trying to add the card to IO configuration...
Replies
3
Views
135
robertmee
R
D
Hardware Configuration Changes to Live Siemens System
Hi all, This is going to be a long post apologies. I'm also a complete beginner to the world of PLCs. I'm currently working on my first ever...
Replies
10
Views
453
mk42
M
Back
Top Bottom