DIN rail 120V indicator light?

Can anyone point me to a 120 volt indicator light that mounts on a DIN rail? It doesn't have to be big; just terminal block with a LED and resistor would be fine.

check this
https://www.phoenixcontact.com/onli...09-02-05/217eacdb-9fcc-4830-983b-489b6819419c

Why don't you just get a dinrail midget fuse holder with blown fuse indication. Don't put a fuse in, superglue it shut, put line voltage in the top and the neutral in the bottom. Job done for about $2.00.

Here's a DIN rail mount. Pust a standard 22mm indicator in it.

Thanks for the suggestions, everyone. Much appreciated!

Here's another option I just found:
http://www.schneider-electric.com/products/ww/en/1600-din-rail-modular-devices/1645-acti-9-indication/7567-iil/

Actually the whole Acti 9 product line looks pretty cool - don't know how much is available in the US, though.

Again, thank you all for those excellent suggestions.

I ended up going in a different direction from my original requirement. Instead of a DIN-rail-mounted solution, I decided to use a metal box with neon indicator lights mounted on the cover. It's inexpensive, and it puts a lot of lights in a small area, which is important since I'm short on "real estate" in the enclosure. I'll mount the box either on the enclosure's subpanel, or on the inside of the door.

Specifically, I'll be using a box and cover from this product line:
http://www.mouser.com/ds/2/177/9c2pg85-58223.pdf

And these indicators:
http://www.mouser.com/ds/2/72/1050QC%201051QC%201052QC%201053QC%20and%201090QC%20Series%20Non--275556.pdf