Andy45 Member A Join Date Mar 2014 Location South Aus Posts 3 Mar 6, 2014 #1 Does anyone know what cable/poinot is needed to connect to a Fatek FB - 40 EA T Plc. It has a 15pin port on the CPU and it appears to be 485.
Does anyone know what cable/poinot is needed to connect to a Fatek FB - 40 EA T Plc. It has a 15pin port on the CPU and it appears to be 485.
Mark- Lifetime Supporting Member M Join Date Nov 2008 Location Texas Posts 766 Mar 6, 2014 #2 Hello, It might be: (4 to 5 might not be needed) Last edited: Mar 6, 2014
Andy45 Member OP A Join Date Mar 2014 Location South Aus Posts 3 Mar 6, 2014 #3 Thanks Mark. Think I have a 9 pin to 15 pin diagram now. Win Pro ladder software aswell. Will post diagram and confirmation of software next week after I confirm. Cheers.
Thanks Mark. Think I have a 9 pin to 15 pin diagram now. Win Pro ladder software aswell. Will post diagram and confirmation of software next week after I confirm. Cheers.
Andy45 Member OP A Join Date Mar 2014 Location South Aus Posts 3 Mar 12, 2014 #4 Solution Used Win Pro ladder and cable pinout attached.