RMore
Member
I am working on a PLC based project and would like to give temperary access to the PLC and HMI to a consultant who is located remotely and is outside our corporate network. I have a laptop with wifi access to the internet and am using my network port to connect to just the HMI and PLC via an Ethernet switch. Is there a software application that will tunnel out to the consultants computer and give him access to the PLC and HMI via the network?
The PLC is a M340 (using Unity Pro) and the HMI is a Magelis (using Vijeo Designer).
I found a standalone product that will do this, supposedly without requiring IT support. However, I only need something temperary, so I was wondering if I can do the same thing using my laptop.
Any suggestions?
The PLC is a M340 (using Unity Pro) and the HMI is a Magelis (using Vijeo Designer).
I found a standalone product that will do this, supposedly without requiring IT support. However, I only need something temperary, so I was wondering if I can do the same thing using my laptop.
Any suggestions?
Last edited: