franchois13
Member
Hi Everyone, I need some guidance on reading/working on ladder diagram.
Was trying to read a program in TIA 15 but there is a network below which I could not find where the coil is or what actually activating the contacts. I tried to searh the whole program but did not come up with anything.
---||------------------------(Q4.0)---
The contact is M100.3 but I checked all cross referenced networks and run a search but could not locate what activates M100.3.
Is there a way that this is hidden or maybe programmed in a different way?
Was trying to read a program in TIA 15 but there is a network below which I could not find where the coil is or what actually activating the contacts. I tried to searh the whole program but did not come up with anything.
---||------------------------(Q4.0)---
The contact is M100.3 but I checked all cross referenced networks and run a search but could not locate what activates M100.3.
Is there a way that this is hidden or maybe programmed in a different way?