I've had only rudimentary education in EE so I'm not sure about this setup. I've had 24V discreet I/O have problems in the past when a relay was added due to the inductive load screwing with signals.
Will this buck transformer give me similar issues if I have other 24 Volt DC components on the same rail? I assume it will act kind of like an inductive load while converting down to 5 volts DC but I'm really just guessing. I think it might just be power for photo eyes and proximity switches but I'm not positive. I'm looking to get some Pis in the mix and need a power source!
Here's the device in question.
Will this buck transformer give me similar issues if I have other 24 Volt DC components on the same rail? I assume it will act kind of like an inductive load while converting down to 5 volts DC but I'm really just guessing. I think it might just be power for photo eyes and proximity switches but I'm not positive. I'm looking to get some Pis in the mix and need a power source!
Here's the device in question.