I am converting a Micrologix 1500 PLC with 16 modules
eight of which are the WIDE style modules installed
on an extension buss.
I am upgrading to a Compactlogix L43 so I can add Controlnet
I/O to the system. I can not figure out or find documentation
on what is used as an adapter to convert from the large
buss connector on the ConmpactLogix PLC to the small black
buss connector on the Micrologix 1500 Buss
I am thinking I will need to have a
1. CompactLogix Power Supply
2. CompactLogix Ethernet Adapter
3. CompactLogix CNB Module
4. CompactLogix to Micrologix Buss Adapter
5. Cable to Micrologix Buss Extender Adapter.
6. Reuse the origional first buss
7. Cable to the origional second buss.
so what am I missing and how far am I off
thanks
eight of which are the WIDE style modules installed
on an extension buss.
I am upgrading to a Compactlogix L43 so I can add Controlnet
I/O to the system. I can not figure out or find documentation
on what is used as an adapter to convert from the large
buss connector on the ConmpactLogix PLC to the small black
buss connector on the Micrologix 1500 Buss
I am thinking I will need to have a
1. CompactLogix Power Supply
2. CompactLogix Ethernet Adapter
3. CompactLogix CNB Module
4. CompactLogix to Micrologix Buss Adapter
5. Cable to Micrologix Buss Extender Adapter.
6. Reuse the origional first buss
7. Cable to the origional second buss.
so what am I missing and how far am I off
thanks