Hello all,
I'm trying to add a Flex I/O module to a current system for a testing/trial.
Chassis set up:
[0] 1756-L61 (controller)
[1] 1765-ENET/A
[2] 1765-ENET/A
.
.
.
.
[10] 1756-HSC
[11] 1756-HSC
[12] 1756-HSC
I am having trouble with the 1756-HSC cards missing counts and would like to try to use the 1794-VHSC in there place. I have a 1794-AENT so I will be putting this on the Ethernet network. When I open up my program and right click on the [1] 1756-ENET module, the "New Module..." is greyed out. Can I use this card to connect the flex I/O network or do I need a bridge card (i.e. 1756-ENBT?)
Thanks,
Killercal.
I'm trying to add a Flex I/O module to a current system for a testing/trial.
Chassis set up:
[0] 1756-L61 (controller)
[1] 1765-ENET/A
[2] 1765-ENET/A
.
.
.
.
[10] 1756-HSC
[11] 1756-HSC
[12] 1756-HSC
I am having trouble with the 1756-HSC cards missing counts and would like to try to use the 1794-VHSC in there place. I have a 1794-AENT so I will be putting this on the Ethernet network. When I open up my program and right click on the [1] 1756-ENET module, the "New Module..." is greyed out. Can I use this card to connect the flex I/O network or do I need a bridge card (i.e. 1756-ENBT?)
Thanks,
Killercal.