I'm looking for an AOI that I can import 2 different times (let's say 1:00 AM and 4:00 PM (12 hour format)). If the current time is between these two times then it turns on a bit, if not the bit is off. So the heater is active at 1AM and not active after 4PM for that day of the week only. The next day might be active from 5pm to 7 pm. The following day different again.
I am creating a 7 day Setup for a water heater. The heater needs to be active between hours X and Y and the heater element is on when the temp is lower than the max value. I know I could use some logic to do this but I'm looking for a cleaner approach.
I'm using RSLOGIX5000, 1769-L30ER, ver 24.01, and an automation direct HMI Cmore Ver 6.31
Thanks ahead of time.
I am creating a 7 day Setup for a water heater. The heater needs to be active between hours X and Y and the heater element is on when the temp is lower than the max value. I know I could use some logic to do this but I'm looking for a cleaner approach.
I'm using RSLOGIX5000, 1769-L30ER, ver 24.01, and an automation direct HMI Cmore Ver 6.31
Thanks ahead of time.