prudent98
Member
Hi,
I want to connect a Panel View 300 through Ethernet to an SLC-5/04.But my PLC support RS-232/DH+ and would appreciate some advice on connections etc. please. I have been reading the 2711-UM014 manual, but am still a bit unsure what additional cables and equipment that I need to achieve what I want, if indeed, I can.
Based on the model number, I believe that the PV300 is support RJ45(Ethernet).
Based on the model number, I believe that the SLC 5/04 is support RS-232.
Any help would be appreciated...
regards
Prudent
I want to connect a Panel View 300 through Ethernet to an SLC-5/04.But my PLC support RS-232/DH+ and would appreciate some advice on connections etc. please. I have been reading the 2711-UM014 manual, but am still a bit unsure what additional cables and equipment that I need to achieve what I want, if indeed, I can.
Based on the model number, I believe that the PV300 is support RJ45(Ethernet).
Based on the model number, I believe that the SLC 5/04 is support RS-232.
Any help would be appreciated...
regards
Prudent