Hi Buddies,
I just got a trouble on a Paper Cutting Machine. The machine is controlled by Controllogix 5550 of AB. There is a Ethernet Module and a Ethernet Hub.
I plug my computer with Rslogix 5000 and Rslinks to a port on the hub, which IP address is 223.223.223.2, my question is:
How I setup my Rslogix 5000 or Rslinks so that I can download the PLC program through this port?
I have only experience on programming with SLC 5/02 .
Your help will be very appreciated. Thanks.
Shawn
I just got a trouble on a Paper Cutting Machine. The machine is controlled by Controllogix 5550 of AB. There is a Ethernet Module and a Ethernet Hub.
I plug my computer with Rslogix 5000 and Rslinks to a port on the hub, which IP address is 223.223.223.2, my question is:
How I setup my Rslogix 5000 or Rslinks so that I can download the PLC program through this port?
I have only experience on programming with SLC 5/02 .
Your help will be very appreciated. Thanks.
Shawn