abdulrehman
Member
Hi,
I am working on packaging machine having 16 load cells.the output of the load cell varying from 0 -25mv and there is no specifications mentioned on that.
1:what is characteristic value?How to find the characteristic value of the load cell?
2:Is the charactersitic value dependant on the load or excitation voltage?,in other words if i change the value of the nominal load like 50 to 100 gram then what will be the caharcteristic value? load cell excitation voltage is +7,-7V volts
3: Can i use the Fatek load cell module(FBs-1LC) with my load cell in which there are only four ranges 2mV/V,5mV/V,10mV/V,20mV/V?My maximun load range will be 100 gram.
4:I wanna convert/amplify this signal to either 4-20mA or 0-10V output?plz suggest the signal conditioner. ..
Regards
AR
I am working on packaging machine having 16 load cells.the output of the load cell varying from 0 -25mv and there is no specifications mentioned on that.
1:what is characteristic value?How to find the characteristic value of the load cell?
2:Is the charactersitic value dependant on the load or excitation voltage?,in other words if i change the value of the nominal load like 50 to 100 gram then what will be the caharcteristic value? load cell excitation voltage is +7,-7V volts
3: Can i use the Fatek load cell module(FBs-1LC) with my load cell in which there are only four ranges 2mV/V,5mV/V,10mV/V,20mV/V?My maximun load range will be 100 gram.
4:I wanna convert/amplify this signal to either 4-20mA or 0-10V output?plz suggest the signal conditioner. ..
Regards
AR