hi i try to wire the motor same as the manual, the brake is wiring to pin 43 for + and 44 for common with the diode (page 123). but the drive is not power on. then my co-worker swap the wire of 43 and 44. it was poweron. the 43 and 44 is a relay for cn1 of ultra 3000 so im little confused. i just want to figure out what going on. thanks
http://literature.rockwellautomation.com/idc/groups/literature/documents/in/2098-in005_-en-p.pdf
http://literature.rockwellautomation.com/idc/groups/literature/documents/in/2098-in005_-en-p.pdf