Lamboom
Lifetime Supporting Member
Hi
This is about making another wired LAN connection configuration.
Ya know when you go to control panel/Network and Internet/network and Sharing center/ and Change Adapter Settings ... You get those cute little "Network Connections". At least one is LAN, and another is Wireless.
You can configure several of each. You can go wireless with a Access Point connected to your Automation System.. and go online with your configuring program..like S7 TIA Portal. Or you can go wired with a Ethernet cable (RG45) in the Wired LAN connection at the back of your PC.
My Question is simply... How does one make new Local Area Connections (wired) .. and new Wireless connections?
When you right-click on them you can access properties .. setting fixed or DHCP IP's .. an' such.
But.. What is the procedure for creating those alternate connections?
Here's an example of 3 connections for wireless.. and one for wired...
Thanks much, Regards, Michael
This is about making another wired LAN connection configuration.
Ya know when you go to control panel/Network and Internet/network and Sharing center/ and Change Adapter Settings ... You get those cute little "Network Connections". At least one is LAN, and another is Wireless.
You can configure several of each. You can go wireless with a Access Point connected to your Automation System.. and go online with your configuring program..like S7 TIA Portal. Or you can go wired with a Ethernet cable (RG45) in the Wired LAN connection at the back of your PC.
My Question is simply... How does one make new Local Area Connections (wired) .. and new Wireless connections?
When you right-click on them you can access properties .. setting fixed or DHCP IP's .. an' such.
But.. What is the procedure for creating those alternate connections?
Here's an example of 3 connections for wireless.. and one for wired...
Thanks much, Regards, Michael