Balluff BNI006a IO Link master shows up in "Unconnected" state inside Studio 5k.
As Shown here: https://imgur.com/EkZWrPK
I have tried soft-rebooting the device through it's webpage, power-cycling. Since I can access it's webpage while on the same network.
This block is used with implicit messaging, so I'm getting not getting signals back and forth.
Any help would be appreciated.
Regards,
-PreLC
As Shown here: https://imgur.com/EkZWrPK
I have tried soft-rebooting the device through it's webpage, power-cycling. Since I can access it's webpage while on the same network.
This block is used with implicit messaging, so I'm getting not getting signals back and forth.
Any help would be appreciated.
Regards,
-PreLC