Gx works2 - PLCS.net

TECHUSER · February 22nd, 2021, 06:48 AM

Hello friends,
i am using gx works2 in Mitsubishi q series Plc.i have 3 plcs in panel which devides in program in 3 parts
i want to know how i can i stop the motor whose programming done in 1st plc.
but due to some programming reasons i want to stop it from 2nd please,
please tell me how to take the reference.

suppose y2 is my motor(present in 1st plc)
want to off with x5 (present in second plc)
How to take reference from other plc??????????????????????

please help as soon as possible...............

Steve Bailey · February 22nd, 2021, 07:14 AM

Posting the same question in four threads won't get a response any faster. All it will do is cause confusion as different people post their answers in different threads.

Program the X5 signal to control a discrete output in PLC#2. Wire that output to an input in PLC#1 and include that input in PLC#1's control of the motor.

TECHUSER · February 22nd, 2021, 07:19 AM

thanks for your valuable reply.....
is it possible without hardware changes..........like any mutaul memory bit or somthing else.....................

thanks

parky · February 22nd, 2021, 07:45 AM

What sort of links have you between the PLC's is it NETH, Ethernet or are you using digital I/O, need more information.

TECHUSER · February 22nd, 2021, 10:39 PM

using ethernet for communication ........and cc link for ios

AlfredoQuintero · February 22nd, 2021, 11:12 PM

If you have available CC-Link IO in all of these PCS, why can't you implement the suggestion from Steve Bailey in post # 2 above? Using Ethernet will be far too much more complex.

TECHUSER · February 22nd, 2021, 11:52 PM

all plcs are communication through ethernet..........
and now i want to use memory bit of 1 plc in plc 2
...
that it

how can i make the memory bit like m345 global

AlfredoQuintero · February 23rd, 2021, 12:48 AM

Quote:

Originally Posted by TECHUSER

all plcs are communication through ethernet..........
and now i want to use memory bit of 1 plc in plc 2
...
that it

how can i make the memory bit like m345 global

I am not so in-depth on Mitsubishi technology. But I think the only way you can achieve this is by means of instructions supported by the MELSEC programming language to read and write bits in the M area of remote Melsec PLC. There is a specification Melsec TCP protocol that all PLCs with an Ethernet module in the case of older Melsec Q PLCs, or in the actual PLC in the case of Q03UVD processors, support.

The Melsec TCP specification allows reading and writing of elements in remote PCLs, but you do have to configure properly all the Ethernet parameters in all processors and then write the correct program.

TECHUSER · February 23rd, 2021, 01:21 AM

thank you

parky · February 23rd, 2021, 03:31 AM

Perhaps this manual will contain what you need

http://www.atronika.com/Mitsubishi/P...ernet-Port.pdf

TECHUSER · February 23rd, 2021, 04:16 AM

thanks brother

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Mitsubishi GX Works2 Structured Text: Logical NOT not working	Panther	LIVE PLC Questions And Answers	1	September 22nd, 2017 06:05 AM
GX Works2 vs GX Works3	gleblanc	LIVE PLC Questions And Answers	3	March 28th, 2016 12:17 PM
Is it mpossible to update GX WORKS2 from IQ WORKS?	sykrising	LIVE PLC Questions And Answers	0	November 4th, 2014 07:18 PM
Introduction + Questions GX DEV / WORKS2 /FX1n	Michael Somnes	LIVE PLC Questions And Answers	4	January 15th, 2014 03:42 PM
GX Works2	yngbld13	LIVE PLC Questions And Answers	2	May 14th, 2013 04:16 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

February 22nd, 2021, 06:48 AM	#1
TECHUSER Member Join Date: Feb 2021 Location: melborn Posts: 25	Gx works2 Hello friends, i am using gx works2 in Mitsubishi q series Plc.i have 3 plcs in panel which devides in program in 3 parts i want to know how i can i stop the motor whose programming done in 1st plc. but due to some programming reasons i want to stop it from 2nd please, please tell me how to take the reference. suppose y2 is my motor(present in 1st plc) want to off with x5 (present in second plc) How to take reference from other plc?????????????????????? please help as soon as possible...............

February 22nd, 2021, 07:14 AM	#2
Steve Bailey Lifetime Supporting Member + Moderator Join Date: Apr 2002 Location: The boondocks of Western Massachusetts USA Posts: 7,424	Posting the same question in four threads won't get a response any faster. All it will do is cause confusion as different people post their answers in different threads. Program the X5 signal to control a discrete output in PLC#2. Wire that output to an input in PLC#1 and include that input in PLC#1's control of the motor.

February 22nd, 2021, 07:19 AM	#3
TECHUSER Member Join Date: Feb 2021 Location: melborn Posts: 25	thanks for your valuable reply..... is it possible without hardware changes..........like any mutaul memory bit or somthing else..................... thanks

February 22nd, 2021, 07:45 AM	#4
parky Member Join Date: Oct 2004 Location: Midlands Posts: 2,951	What sort of links have you between the PLC's is it NETH, Ethernet or are you using digital I/O, need more information.

February 22nd, 2021, 10:39 PM	#5
TECHUSER Member Join Date: Feb 2021 Location: melborn Posts: 25	using ethernet for communication ........and cc link for ios

February 22nd, 2021, 11:12 PM	#6
AlfredoQuintero Lifetime Supporting Member Join Date: Feb 2015 Location: Yokohama Posts: 490	If you have available CC-Link IO in all of these PCS, why can't you implement the suggestion from Steve Bailey in post # 2 above? Using Ethernet will be far too much more complex.

February 22nd, 2021, 11:52 PM	#7
TECHUSER Member Join Date: Feb 2021 Location: melborn Posts: 25	all plcs are communication through ethernet.......... and now i want to use memory bit of 1 plc in plc 2 ... that it how can i make the memory bit like m345 global

February 23rd, 2021, 01:21 AM	#9
TECHUSER Member Join Date: Feb 2021 Location: melborn Posts: 25	thank you

February 23rd, 2021, 03:31 AM	#10
parky Member Join Date: Oct 2004 Location: Midlands Posts: 2,951	Perhaps this manual will contain what you need http://www.atronika.com/Mitsubishi/P...ernet-Port.pdf

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

February 23rd, 2021, 04:16 AM	#11
TECHUSER Member Join Date: Feb 2021 Location: melborn Posts: 25	thanks brother