Hello all,
I'm hoping that someone out there can help me out with some connection issues that I have recently encountered. Here are some of the particulars...
- We are using a Control Logix platform to communicate with a Cognex 5100 enet camera to measure our outgoing product. We currently have 1 machine up and running with this setup, however the integrator cannot remember how to resolve the issue that we have encountered.
- I have already verified and reverified the ethernet connection parameters for both the Cognex as well as the Control Logix against the machine that is currently running in production.
- Using a Control Logix 5555 with a DH+ as well as an ENBT.
- Can ping the Control Logix ENBT card as well as the Cognex camera using my laptop (all connected via a hub).
- The Cognex camera is setup as a generic ethernet module (submodule of the ENBT card).
- In the Module Fault field of the submodule of the ENBT card I am getting the following error: (Code 16#0315) Connection Request Error: Invalid segment type.
I have screen shots of the Control Logix connection dialogue for the ENBT and Cognex setups for the running machine as well as the non running machine for anyone that would like to view them. Just let me know.
Any help that anyone can give is greatly appreciated!!!
Thanks in advance.
TerriLaf.
I'm hoping that someone out there can help me out with some connection issues that I have recently encountered. Here are some of the particulars...
- We are using a Control Logix platform to communicate with a Cognex 5100 enet camera to measure our outgoing product. We currently have 1 machine up and running with this setup, however the integrator cannot remember how to resolve the issue that we have encountered.
- I have already verified and reverified the ethernet connection parameters for both the Cognex as well as the Control Logix against the machine that is currently running in production.
- Using a Control Logix 5555 with a DH+ as well as an ENBT.
- Can ping the Control Logix ENBT card as well as the Cognex camera using my laptop (all connected via a hub).
- The Cognex camera is setup as a generic ethernet module (submodule of the ENBT card).
- In the Module Fault field of the submodule of the ENBT card I am getting the following error: (Code 16#0315) Connection Request Error: Invalid segment type.
I have screen shots of the Control Logix connection dialogue for the ENBT and Cognex setups for the running machine as well as the non running machine for anyone that would like to view them. Just let me know.
Any help that anyone can give is greatly appreciated!!!
Thanks in advance.
TerriLaf.