Factory talk view studio me 5.0 help

Hello, I have serched this site but cant't find the answer to the problem i am having and was wondering if anyone could help me. I'm writing a program for a panelview plus 1250 with Factory Talk View Studio version 5.0 and i added a device shortcut to a slc505 and then when i created an object (momentary pushbutton) i opened the connections tab and clicked on the tag database. The addresses that come up only show to word level and i need to be able to see bit level addresses on b3. The address i need to add to the object is b3:0/0 and it only shows b3:0 any help would be greatly appreciated. Thanks!

On the properties of the button, under button settings, make sure you have checked "Normally open" or "Normally closed", and not "Value".

If you need to "see" to the bit level you are out of luck. But you can select the word "b3:0", then suck it up and type in "/3".

Thanks guys, I'll try that.

It worked! Thanks again!