Micrologix1400 and Weintek HMI

Hi all, ive posted a similar question before but decided to do a new post.

I have a ML1400 and a Weintek MT8071iE.

After connecting everything through a hub vie Ethernet. (ML1400 Chanel 1),
Im looking at the PLC connection guide in the manual. My options are in the image below.
I cant seem to see what configuration i would use? Considering it is all via Ethernet and it is a Micro(not a compact or a control logix).

Am i missing something??

Thanks in advance.

P.S. as a side note, everything pings nicely.

Weintek to ML1400

Hi,
Use Rockwell EtherNet/IP (DF1).
like attached PIC.
Regards,

I second that !