I have network connections through to most processors in our facility. I am wanting to setup a control logix rack for testing and I am trying to get it online.
I have a new enbt module and used bootp to create a ip address. bootp pushed the ip to the enbt with no problem, but I cant get it to go online through linx.
I am thinking I need to assign a gateway, but I cant connect to do this. Also, when I look at what is already established in linx, in configuration it has IP's assigned by node #. In RSwho, in the tree it will show this IP and another IP in brackets. This is where I think I am missing the boat. How would I be able to communicate with this processor standalone through a cat 5 cable and avoid the main network?
Thanks in Advance.
I have a new enbt module and used bootp to create a ip address. bootp pushed the ip to the enbt with no problem, but I cant get it to go online through linx.
I am thinking I need to assign a gateway, but I cant connect to do this. Also, when I look at what is already established in linx, in configuration it has IP's assigned by node #. In RSwho, in the tree it will show this IP and another IP in brackets. This is where I think I am missing the boat. How would I be able to communicate with this processor standalone through a cat 5 cable and avoid the main network?
Thanks in Advance.