Micrologix 1500 - Timers Reset

google

Member
G
Join Date
Aug 2002
Posts
11
Hi,

I want to reset 20 timers simultaneouly in Micrologix 1500. Is it possible to do it with one command instead of using 20 CLR or MOV commands?

Thanks,

Google
 
I'm pretty sure it's possible with 3 rungs in a loop with indirect addressing (does the 1500 support this?... not sure... I'll have to check)
 

Similar Topics

P
Micrologix 1500 sequencers and timers
I was wondering how I might go about using my sequencer in such a way that I can set a time at each step or positon in the sequence. What will be...
Replies
1
Views
1,571
Blijj
B
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
82
jscampbell210
J
Z
Micrologix 1500 LSP Series A Firmware upgrade fail DTL_E_FAIL I/O
Hello, I have a 1764 1500 LSP Series A that keeps failing with DTL_E_FAIL I/O error. Searching around it seems there's a weird issue specifically...
Replies
2
Views
106
joseph_e2
J
E
Micrologix 1500 LSP
Good Day i Have Micrologix 1500 LSP, and I want to get data from plc and send it through Modbus RTU slave; I have only ch0 on that plc I Order...
Replies
6
Views
917
drbitboy
drbitboy
A
micrologix 1500 with OMRON NS HMI
Hello folks, Hope everyone is doing fine. I got an OMRON NS10-TVOOB-V2 hmi screen last day and planning to use it with Micrologix 1500. 1. Is...
Replies
4
Views
1,208
advmin
A
Back
Top Bottom