Hello,
I was trying to make a HMI simulation and i found that my HMI can’t affect the inputs in RUN Mode. When i press the button in Stop mode i can affect the inputs in the force input table of the PLC Sim but when i run it i only can change the inputs from the force inputs table. I also can’t modify inputs from TIA Portal blocks so the only way is the PLC Sim Force input, Why ?
I’m using TIA Portal V13 SP1
Thank you.
I was trying to make a HMI simulation and i found that my HMI can’t affect the inputs in RUN Mode. When i press the button in Stop mode i can affect the inputs in the force input table of the PLC Sim but when i run it i only can change the inputs from the force inputs table. I also can’t modify inputs from TIA Portal blocks so the only way is the PLC Sim Force input, Why ?
I’m using TIA Portal V13 SP1
Thank you.