lostpatrol1
Member
- Join Date
- Aug 2002
- Posts
- 67
Anyone know how to do a value scan from one scan to another scan? Using Micrologix 1500 PLC?
By that I mean, i.e. I store a value HSC:1.ACC to N7:1 (this scan), then next scan I compare HSc:1.ACC to N7:1 which was stored at the previous scan.
Thanks.
By that I mean, i.e. I store a value HSC:1.ACC to N7:1 (this scan), then next scan I compare HSc:1.ACC to N7:1 which was stored at the previous scan.
Thanks.