Hi guys,
I am having following problems in Factory talk view studio (Studio 5000 )
I am using Codesys.OPC.DA server and Application.sdb file for Data source file to get all tag details.
1. Data Source tags are communicating directly on run time, but when we assign alise to that particular tag it is showing error.
Ex: PLC1..Data1 is assigned to Tag1 in
if you use PLC1..Data1 and Tag1 for numeric display, PLC1..Data1 is communicating without any error.
2.Derived tags are not updating expression outcome to assign tags.
3.Alarm Setup : Want to define individual alarm with single byte=8Alarm/word=16Alarm. Is there any easy way to do it.
Please help me if any one is expert in Factory talk SCADA system
I am having following problems in Factory talk view studio (Studio 5000 )
I am using Codesys.OPC.DA server and Application.sdb file for Data source file to get all tag details.
1. Data Source tags are communicating directly on run time, but when we assign alise to that particular tag it is showing error.
Ex: PLC1..Data1 is assigned to Tag1 in
if you use PLC1..Data1 and Tag1 for numeric display, PLC1..Data1 is communicating without any error.
2.Derived tags are not updating expression outcome to assign tags.
3.Alarm Setup : Want to define individual alarm with single byte=8Alarm/word=16Alarm. Is there any easy way to do it.
Please help me if any one is expert in Factory talk SCADA system