Can anyone tell me if i need an eds file for the managed switch RS20 (Hirschmann). I had it mapped in the I/O tree and when i went on-line, i had a yellow triangle mark next to it.
The problem is i could get some data out of it from the switch Params.Data but nothing from Params.Inputs.
Please help and if i need the EDS file, where can i get it.
I could not find it anywhere.
Thanks
Vin
The problem is i could get some data out of it from the switch Params.Data but nothing from Params.Inputs.
Please help and if i need the EDS file, where can i get it.
I could not find it anywhere.
Thanks
Vin