Hello everyone. I am currently working on a project using a Panelview Plus 1500. A large amount of the inputs for the project are controlled with momentary push buttons and other on screen objects on the HMI, rather than physical inputs. Currently almost every object functions on the rising edge, that is, I can press the "Cycle Start" push button, and hold it for 20 minutes and it will do nothing until I release it. I'm not sure what exactly is causing this. I have looked through all of the property options in FactoryTalk View, and through the options within the setup screens of the HMI and none of them seem to relate to this. I have also reset the HMI but that didn't change anything. The odd thing is that the "User Login" and "Logout User" buttons as shown in the attached image activate on press rather than release.
Anyone have any ideas as to what could be causing this? Thanks in advance.
Anyone have any ideas as to what could be causing this? Thanks in advance.