Number placement

Good day all,

I am having a loss of function in my brain today and thought I'd ask the group here what they thought.

I am trying to make an AOI in Studio 5000 that will allow a numeric input to allow how many decimal points would be displayed.

A 1 entered the display would be XX.X, a 2 would be XX.XX and so on and so forth.

I think the easiest way to be to multiply 1 by ten and do a loop for how many times equal to the number entered, but I can't figure out the logic to do it. I can go either structured text or ladder.

Can someone help me? Thanks in advance

This is somewhat covered in this thread
http://www.plctalk.net/qanda/showthread.php?t=132767&highlight=decimal+places&page=3
There is some code although not ladder or ST but FBD should be easy to convert though, it might give you some ideas.

Structured text would be boring, as usual, so here you go: