Hi,
Currently, I am configuring Redundancy system in one of my project and facing with a problem ( Secondary Module always show DISQ and can’t synchronize with Primary PLC ).
Following are products and versions which I am using in our system.
PLC : 1756-L75 ,
RsLogix 5000 : Rev 21
RsLinx Classic : Rev 3.7
Redundancy Module : 1756-RM/B.
Please refer to attachment pictures for more details of redundancy modules.
I go trough manual and found that I should have RMCT ( Redundancy Module Configuration Tool ) to configure the redundancy module.(Please refer to pix, Manual_RMCT)
But, when I follow the manual , open Rslinx and right click on the module, there is no "Configuration module" , that is why I can't configure the module.
Could anyone please advise how can I get RMCT and its features ?
Thank you,
Min.
Currently, I am configuring Redundancy system in one of my project and facing with a problem ( Secondary Module always show DISQ and can’t synchronize with Primary PLC ).
Following are products and versions which I am using in our system.
PLC : 1756-L75 ,
RsLogix 5000 : Rev 21
RsLinx Classic : Rev 3.7
Redundancy Module : 1756-RM/B.
Please refer to attachment pictures for more details of redundancy modules.
I go trough manual and found that I should have RMCT ( Redundancy Module Configuration Tool ) to configure the redundancy module.(Please refer to pix, Manual_RMCT)
But, when I follow the manual , open Rslinx and right click on the module, there is no "Configuration module" , that is why I can't configure the module.
Could anyone please advise how can I get RMCT and its features ?
Thank you,
Min.